Rohde ST 410 - Control Unit Description; Product Features; Technical Information

44 / 291 - EN -
2. Control unit description
2.1. Product features
ST 410/ST 411:
 32 programs with up to 32 segments each
 1 controlled heating/cooling ramp + soak per segment
 Soak times up to 99 hours 59 mins
 Ramp rates from 1 to 999°C/h or “FULL”
 Ideal for glass or ceramics use
 Programs can be altered while the kiln is in operation
 Program pause facility
 Program advance facility
 Keylock
 Program start delay facility – up to 99 hours 59 mins
 Continuation of kiln operation after a power failure
 Displays energy used
 Setpoint display
 Alarm buzzer
 Buzzer
 Temperature display either in °C or °F
 USB interface for data logging
ST 411 only:
 Integrated Wi-Fi module for connection to a wireless network
 Additional programmable switch output (e.g., automatic exhaust air flap)
 Optional "hysteresis" control for photovoltaics / PV systems (contact the manufacturer)
2.2. Technical information
Information Description
Protection class
2
Degree of pollution
2
IP rating
IP50
Supply
100-240 V, AC, 50-60 Hz, 1.0 A
Fuse
Micro-fuse, 3.15 A, 5 x 20 mm, slow-blow, ceramic, HRC
ROHDE item no.: 704851
Ambient temperature
-5°C to +30°C
Weight
0.5 kg
Housing dimensions
Width 80/68 mm x height 165 mm x depth 28 mm
Housing material
Plastic, ABS, flame retardant, UL 94V-0
Bracket material
Plastic, ABS, flame retardant, UL 94V-0
Connection cable
Length 2 m, insulation PU, CPC 14 connector
Thermocouple
type R, type S, type K, type N