Rohde ST 410 - Wi-Fi Module (ST 411 Only); General Description of Wi-Fi Module; Wi-Fi Functions

69 / 291 - EN -
10.1.9. Log file format
Year
Month
Day
Hour
Minute
Second
Kiln
Temperatur
e
Setpoint
Ambient
Temperature
Program
Segment
Event
Status
2018 4 1 20 8 52 26.7 28 24 7 1 0 Heating ramp
2018 4 1 20 9 7 26.7 28 24.2 7 1 0 Heating ramp
2018 4 1 20 9 22 26.7 28 24 7 1 0 Heating ramp
2018 4 1 20 9 37 26.7 28 24 7 1 0 Heating ramp
2018 4 1 20 10 52 26.7 28 24 7 1 0 Heating ramp
2018 4 1 20 10 7 26.7 28 24 7 1 1 Heating ramp
2018 4 1 20 10 22 26.7 28 24 7 1 1 Heating ramp
2018 4 1 20 10 37 26.7 28 24 7 1 1 Heating ramp
2018 4 1 20 10 52 26.7 28 23.9 7 1 1 Heating ramp
Note:
 A value of “1” in the “Event” column indicates that the switch output was active in the completed firing program
at the specified time. In these cases, the switch output (event) indicator lights up above the event key on the
front of the controller.
 A value of “0” in the “Event” column indicates that the switch output was not active in the completed firing
program at the specified time. In these cases, the switch output (event) indicator above the event key on the
front of the controller does not light up.
10.1.10. Saving on USB flash drive
The control system does not overwrite any files that have already been created on the inserted USB flash drive. It is
recommended that you regularly move files that have already been generated from the USB flash drive to a computer,
to save the files for evaluation and not to exceed the storage capacity of the flash drive.
10.2. Wi-Fi module (ST 411 only)
10.2.1. General description (ST 411 only)
The control unit can be connected to a wireless network (Wi-Fi).
10.2.2. Functions possible with Wi-Fi (ST 411 only)
Various functions between the control system (kiln) and a computer, tablet or smartphone can be carried out using a
Wi-Fi connection. The Wi-Fi connection is mainly used with the ROHDE App myKiln (see Section 10.4.).
Possible function:
 Measured values recorded by the controller can be sent wirelessly to a computer, tablet or smartphone for
evaluation.
 The kiln operation can be observed and monitored in real-time from a computer, tablet or smartphone (ROHDE
App myKiln).
 Firing program data can be loaded onto the controller using ROHDE App myKiln.