Rohde ST 410 - ROHDE App myKiln; General Information on ROHDE App myKiln; Registering Controller in ROHDE App myKiln

73 / 291 - EN -
Code-Number Description
20
The controller displays the error message "Error 5“ (temperature overshoot).
21
The controller displays the error message "Error 6“ (program runtime hours exceeded).
22
The controller displays the error message "Error 7“ (ambient temperature trip).
Note:
In the log file, the code numbers 1 & 2 are normally not displayed, since the log file is only filled when a program is
active.
10.4. ROHDE App myKiln
10.4.1. General informationen
ROHDE App myKiln is an application for the visualisation, archiving, creation, editing or managing of firing curves from
the recorded measured values of the control system.
Create an
account
N
Create a free account and register the controller there with the
“Access code”.
Connect to
Wi-Fi
7 p
Connect the controller and device (computer, tablet or smartphone) to
the Wi-Fi.
Record data
7
The firing data is automatically recorded in ROHDE App myKiln during
firing with the controller.
Monitoring and
evaluating
X
The firing data is displayed and saved as a firing curve in ROHDE App
myKiln.
Send program
data
G
Create, edit or manage firing program data and load it onto the
controller with ROHDE App myKiln.
System
Z
Internet-capable device (computer, tablet or smartphone) and a Wi-Fi
access point for connecting the controller to the Internet.
Informationen, FAQ and free account at:
app.rohde.eu (Web) myKiln in the App Store (Android) myKiln in the App Store (Apple)