To Next PageTo Next Page
Need help?Do you have a question about the Rohde ST 410 and is the answer not in the manual?
Provides an overview of the ST 410/ST 411 controller and its features.
Lists the parts included in the ST 410/ST 411 control unit package.
Provides safety precautions for cleaning the control unit and kiln.
Details the procedure for cleaning the control unit using a dry cloth.
Outlines the warranty terms and conditions for the control unit.
Details the key features and capabilities of the ST 410/ST 411 control units.
Provides technical specifications like protection class, IP rating, supply, and dimensions.
Identifies and describes the various ports, indicators, and buttons on the control unit.
Details the pin configuration for the 14-pin CPC connector.
Explains the necessity of RC circuits for kiln contactors.
Highlights critical safety warnings regarding manual adherence, proper connection, and electrical hazards.
Emphasizes correct placement of the control unit to prevent injury or damage.
Explains how to attach the mounting bracket to the kiln or wall.
Provides step-by-step instructions for connecting the control unit cable to the kiln.
Explains how to use the rocker switch to power the control unit on and off.
Provides basic steps to get the control unit operational quickly.
Describes how to lock and unlock the control unit's keys to prevent accidental changes.
Explains how to use the INFO key to access additional information and status displays.
Describes the components of a firing segment: ramp, target temperature, and soak time.
Illustrates a firing program with a visual representation and sequence explanation.
Step-by-step guide on how to modify existing firing programs.
Introduces the additional switch output on the ST 411 for controlling external devices.
Explains how to set parameters for the switch output in configuration mode.
Provides examples of how the switch output can be assigned, e.g., for air dampers.
Describes the startup, operation, and interruption of the firing process.
Details how to check kiln performance and energy consumption.
Describes the display indications and actions during the cooling phase of a firing.
Addresses situations where the kiln heats or cools slower than programmed.
Explains the controlled heating and cooling ramp capabilities of the unit.
Explains how the controller automatically continues firing after a power interruption.
Explains how errors are indicated by buzzer and display messages.
Describes how error messages appear on the main and segment displays.
Details how to access more information about a specific error.
Describes the USB port for data logging and program transfer.
Introduces the Wi-Fi capability for connecting the control unit to a wireless network.
Lists functions like remote monitoring and program loading via Wi-Fi.
Introduces ROHDEgraph software for visualizing and archiving firing curves.
Explains the meaning of controller status codes found in ROHDEgraph log files.
Describes the myKiln app for managing firing curves and controller data.
Explains how to register the controller using its unique access code.
Provides crucial safety warnings before troubleshooting or repairing faults.
Lists configurable parameters, their ranges, and default settings.
Details the process for selecting and modifying parameter values.
Provides sample firing programs for biscuit, earthenware, and stoneware.
Offers advice on adapting and using firing programs for different materials.
General| Brand | Rohde |
|---|---|
| Model | ST 410 |
| Category | Control Unit |
| Language | English |
