80 / 291 - EN -
17. Declaration of Conformity
We declare that the relevant and basic requirements of the Low Voltage Directive 2014/35/EU have been met.
Manufacturer: Helmut ROHDE GmbH
Ried 9
83134 Prutting
Germany
Community resident authorised
to compile the relevant technical
documentation: Helmut ROHDE GmbH
Stefan Meier
Ried 9
83134 Prutting
Germany
This declaration of conformity of the product described below is issued under the sole responsibility of the
manufacturer.
Description and identification
Product: Control unit
Model: ST 410/ST 411
Purpose: Control of kilns for household, commercial and light industrial use
We also declare that the special technical documents were created.
The protection goals of the following additional EU directives have been met:
2014/30/EU Electromagnetic Compatibility Directive
2012/19/EU Waste Electrical and Electronic Equipment Directive
The following harmonised standards were used, among others:
EN 61010-1:2020-03 Safety regulations for electrical measuring, control, regulating and
laboratory devices, Part 1: General requirements
EN 60204-1:2019-06 Safety of machinery. Electrical equipment of machines,
Part 1: General requirements
EN 60335-1:2012-10 Household and similar electrical appliances. Safety.
Part 1: General requirements
The technical documentation can be sent to a national authority following a justified request.
Prutting, January 16th, 2023 Benjamin Rohde (General Manager)
(Place and date) (Signature)
To Next Page
Loading...
