50 / 291 - EN -
6. Operation & use
6.1. Keylock
Step Action Display screen
Unlock keys
1
If any key is pressed and “LOC” appears in the display, the keys are locked.
LOC
2
To unlock, press the
d
and
f
keys and hold it down for 5 seconds until
“ULOC” appears in the main display.
ULOC
Lock keys
1
To lock, press the
d
and
f
keys and hold it down for 5 seconds until
“LOC” appears in the main display.
LOC
2
If any key is pressed and “LOC” appears in the display, the keys are locked.
LOC
6.2. INFO key
h
6.2.1.
General description
The INFO button
h
can be pressed at any time to obtain additional information. It doesn't matter whether the
controller is running a program or not.
6.2.2.
Operation
INFO key
h
Description
Key pressed once
The maximum temperature of the current program is displayed.
Key pressed twice
The currently consumed energy is displayed in kWh (parameter P14 must be set).
Key pressed 3 times
The current setpoint is displayed.
Key pressed 4 times
The controller shows the current temperature again.
Note
After 10 seconds, the INFO display returns to the normal display (current kiln
temperature), if no button is pressed.
The INFO display can be ended immediately by pressing either the
g
or
f
or
d
button.
To Next Page
Loading...
