Rondo Rondostar 5000 Basic - Page 113

Cleaning
Edition BE210202
03.2022
Rondostar 5000
Operating manual
113
6.1.1.4 Scrapers / Rollers
Use a cloth to protect your hands, as the edges of the scraper
blades are sharp and there is a danger of cuts.
• Damp clean the scrapers / rollers daily with a brush / cloth and
soapy water.
• RONDO recommends cleaning the conveyor belts while the
scrapers are removed.
• RONDO recommends cleaning the light barrier while the scrapers
are removed.
Also see 7.3.2 Replacing the scrapers
1. Open side tab.
2. Tap cleaning menu.
3. Tap scraper cleaning.
4. Tap scraper change position.
5. Open the safety guard.
6. Remove scrapers.
(see 7.4.6.1 Removing the scrapers)
7. Clean scrapers.
8. Close the safety guard.
9. Tap maximum roller gap.
10. Open the safety guard.
11. Clean rollers.
12. Close the safety guard.
13. Tap scraper change position.
14. Open the safety guard.
15. Insert scrapers.
(see 7.4.6.3 Mounting the scraper)
16. Close the safety guard.