Alpha 710ML User’s Guide 26
Setting Header Messages and Footer Messages
Remember, you can make the characters double width but you can only
use half the total number of characters if you do this. For example, if you
want Coffee to be double wide, you need 12 spaces. For more
information about double wide characters, see Using Double Wide
Characters on page 24.
You can also use characters other than those on the Department keys,
such as numbers, punctuation, and international letters by pressing the
#\NS <SYM> key.
This is an example of the programmed header message:
To add a space to separate words, press the Department Shift key and
then the Department 17 key.
Important
If you enter the wrong character, press the Void <bksp> key to delete the
character. Now you can continue.
To program header messages or footer messages
ProgrammingMore OptionsText Messages
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
Tend Total <Enter> key.
3 If you are prompted for a Manager Passcode, type the passcode number
and then press the Check key. If you did not program a Manager
Passcode, go to the next step.
4 Press the Arrow Down key to select More Options. Press the Amount
Tend Total <Enter> key.
5 Press the Arrow Down key to select Text Messages. Press the Amount
Tend Total <Enter> key.
6 Select the text message you want to program.
7 Follow the instructions on the display.
INTERNATIONAL COFFEES
999-555-1212
222 EAST MAIN STREET
OPEN 7AM TO 6PM
COFFEES OF THE WORLD
To Next Page
Loading...
