Chapter 6 Ringing up Sales and Using Training Mode
63 Alpha 710ML User’s Guide
Ringing up Sales without a PLU Number
You can ring up a sale for an item that does not have a PLU number.
To ring up a straight cash sale without a PLU number
1 Make sure Sales Registration is highlighted on the main menu and press
the Amount Tend Total <enter> key.
2 If the clerk numbers are set, do the following:
• Enter the clerk number and then press the Amount Tend Total
<enter> key.
• Using the round Number keys, press the three digit passcode and then
press the Check key.
3 Using the round Number keys area, enter the price of the first item.
4 Press the Department key for that item.
To use the Department keys from 17 to 32, do the following:
• Press the Dept Shift key and press the department number you want to
use.
To use department numbers from 33 to 200, do the following:
• Press the Dept Shift key.
• Using the round Number keys, type the Department number from 33
to 200 that you want to use. For example, for Department 63, press the
6 key and then press the 3 key.
• Press the Dept Shift key again.
5 Repeat for the rest of the items.
6 When you are done ringing up items, press the Amount Tend Total
<enter> key. The cash drawer opens and the receipt or journal prints.
7 Make any change needed and place the money you are given in the cash
drawer. Close the cash drawer.
8 Give the customer the receipt, if the cash register is set to print receipts.
You are ready to ring up another sale.
To Next Page
Loading...
