Chapter 4 Setting Up Your Cash Register - the Basics
47 Alpha 710ML User’s Guide
Clearing an Error
The Clear key stops an alarm beep that happened because a key was
pressed that was not correct for that operation.
The Clear key does not erase a transaction that was registered by an
operating key and printed on the register tape.
To erase an entry after you press a key that printed the entry on the tape
during a sales transaction, use the Void <bksp> key to correct the error
and undo the last entry.
If the cash register makes a loud error beep, press the Clear key to stop it.
If your cash register will not stop making a beeping sound after you press
the Clear key, you can do three more things.
Half System Clear
If you pressed the Clear key and the error beep does not stop, you can do
a Half System Clear. For more information about a Half System Clear, see
Half System Clear on page 96.
Partial Reset
A Partial Reset can help if the Half System clear did not help. For more
information, see Partial Reset on page 97.
Full System Clear
If you did a Half System Clear and a Partial Clear and the error beep still
does not stop, as a last resort, you can do a Full System Clear. For more
information about the Full System Clear, see Full System Clear on
page 97.
To Next Page
Loading...
