Royal Alpha 710ML - Page 48

Chapter 4 Setting Up Your Cash Register - the Basics
41 Alpha 710ML User’s Guide
5 Press the Arrow Down key to select Others Setup. Press the Amount
Tend Total <Enter> key.
6 Press the Arrow Down key to select the Credit Name you want to
change. Press the Amount Tend Total <Enter> key.
7 Type the name of the credit card just as you did when you programmed
Department names. You can type up to 12 characters and spaces.
• For more information about using the Department keys to type letters,
see Programming Department Keys on page 32.
Important
If you enter the wrong character, press the Void <bksp> key to delete the
character. Now you can continue.
8 When you are done, press the Amount Tend Total <Enter> key.
To specify using Department 15 and/or Department 16 as credit keys
ProgrammingMore OptionsSystem Options
1 Press the Main menu (on) key.
2 Press the Arrow Down key to select Programming. Press the Amount
Tend Total <Enter> key.
3 If you are prompted for a Manager Passcode, type the passcode number
and then press the Check key. If you did not program a Manager
Passcode, go to the next step.
4 Press the Arrow Down key to select More Options. Press the Amount
Tend Total <Enter> key.
5 Press the Arrow Down key to select System Options. Press the Amount
Tend Total <Enter> key.
6 Select 1. Key Layout and press the Amount Tend Total <Enter> key.
Note
To stop using Department 15 and/or Department 16 as credit keys, select
Normal Layout.
7 Follow the instructions on the screen. When you are done, press the
Amount Tend Total <Enter> key.
• Credit 1 = Dept 16 key
• Credit 2 = Dept 15 key
• Credit 1 = Dept 16 key
• Credit 2 = Dept 15 key