Samsung DCS-816 - Page 224

SAMSUNG Programming
DCS-816 February, 1999
MMC 800 (Page 2 of 2)
3. Enter 1 to enable or 0 to disable
OR
Press UP or DOWN to select
If not assigned any data in MMC 812, you have
to select your Country Code
The system is restarted and all MMC data is
changed for selected country
ENABLE TECH.PROG
ENABLE
ENABLE TECH. PROG
SELECT COUNTRY
ENABLE TECH. PROG
NONE
ENABLE TECH. PROG
E.U.
4. Press SPK to advance to MMC entry level
801:TEC.PASSCODE
SELECT PROG.ID
5. Enter the MMC desired (e.g., 210)
210:TEN.ON & OFF
LCR ENABLE :OFF
6. To log out and return to MMC 800, press UP or
DOWN key to select DISABLE
OR
Press SPK then TRSF to return to normal
display
Programming option will time out
DEFAULT DATA: DISABLE
RELATED ITEMS: None