Santec TSL-710 - Page 75

Tunable Semiconductor Laser TSL-710
7-21
4) *OPC? Operation Complete Query
Syntax *OPC?
Description Places 1 in the output queue when all operation processing
has completed.
Response 0: (In operation)
1: (Operation completed)
5) *CLS Clear Status
Syntax *CLS
Description Clears all event registers and queues and reects the
summary in the Status Byte Register.
Clears the following items.
・Status Byte Register
・Standard Event Status Register
・Error Queue
Parameter None
Response None
6) *ESE Standard Event Enable Register Setting
Syntax *ESE<wsp><value>
Description Sets the Standard Event Enable Register (SEER).
Parameter Setting value from 0 to 255
Response None
7) *ESE? Standard Event Enable Register Query
Syntax *ESE?
Description Places the value of the Standard Event Enable Register
(SEER) in the output queue.
Parameter None
Response Integer from 0 to 255
8) *ESR? Standard Event Status Register Query
Syntax *ESR?
Description Places the value of the Standard Event Status Register
(SESR) in the output queue. Register is cleared after being
read.
Parameter None
Response Integer from 0 to 255