Tunable Semiconductor Laser TSL-710
7-37
Response Range：-100.00 〜 +100.00 (Unit: None)
Step：0.01 (Unit: None)
Example :WAV:FIN?
→ 100.00
Indicates that the setting value of the ne-tuning is 100.
[:SOURce]:WAVelength:FINe:DISable
Syntax [:SOURce]:WAVelength:FINe:DISable
Description Disables the ne-tuning.
Parameter None
Response None
Example :WAV:FIN:DIS
[:SOURce][:WAVelength]:FREQuency
Syntax
[:SOURce][:WAVelength]:FREQuency<wsp> <value>
Description Sets the output wavelength in optical frequency.
The unit is THz. When the unit is
returned to wavelength (nm), execute the
[:SOURce]:WAVelength:UNIT 0 command.
Parameter Range：Minimum frequency to
Maximum frequency (THz)
Step：0.00001(THz)
Response None
Example :FREQ 190.0000
Sets the output wavelength to 190 THz.
[:SOURce][:WAVelength]:FREQuency?
Syntax [:SOURce][:WAVelength]:FREQuency
[:MINimum|:MAXimum]?
Description Reads out the output wavelength in
optical frequency.
Parameter None: Reads out the currently set frequency.
MINimum: Reads out the minimum
acceptable frequency.
MAXimum: Reads out the maximum
acceptable frequency.
Response Range: Minimum frequency to
Maximum frequency：(THz)
Step：0.00001 (THz)
Example :FREQ:MIN?
Returns the minimum acceptable frequency.
To Next Page
Loading...
