Santec TSL-710 - Page 95

Tunable Semiconductor Laser TSL-710
7-41
[:SOURce]:WAVelength:SWEep:STARt
Syntax [:SOURce]:WAVelength:SWEep:STARt<wsp><value>
Description Sets the sweep start wavelength.
Parameter Range: Wavelength range (nm)
Step：0.0001 (nm)
Response None
Example :WAV: SWE: STAR 1500
Sets the sweep start wavelength to 1500 nm.
[:SOURce]:WAVelength:SWEep:STARt?
Syntax [:SOURce]:WAVelength:SWEep: STARt?
Description Reads out the sweep start wavelength.
Parameter None
Response Range: Wavelength range (nm)
Step：0.0001 (nm)
Example :WAV:SWE:STAR?
→ 1500.000
Indicates that the sweep start wavelength is
set to 1500 nm.
[:SOURce]:WAVelength:SWEep:STOP
Syntax
[:SOURce]:WAVelength:SWEep:STOP<wsp> <value>
Description Sets the sweep end wavelength.
Parameter Range: Wavelength range (nm)
Step：0.0001 (nm)
Response None
Example :WAV:SWE:STOP 1620
Sets the sweep end wavelength to 1620 nm.
[:SOURce]:WAVelength:SWEep:STOP?
Syntax [:SOURce]:WAVelength:SWEep:STOP?
Description Reads out the sweep end wavelength.
Parameter None
Response Range: Wavelength range (nm)
Step：0.0001 (nm)
Example :WAV:SWE:STOP?
→ 1620.000
Indicates that the sweep end wavelength is
1620 nm.