PLC-WU3800 Expand Serial Command Functional Specifications
11/74
5.4 Screen Command Table
Select Screen size
Cancel Digital Zoom mode
Set Keystone
Set Keystone Store mode
Set value of Vertical scale
Set value of Vertical position
Set value of Horizontal scale
Set value of Horizontal position
5.5 Lamp Command Table
Reset total running time of each lamp
Select Lamp mode
5.6 Sound Command Table
Set Volume value
Control ON/OFF of Sound Mute
5.7 Setting Command Table
Select language for OSD
Move menu position.
Set Auto PC in Auto Setup
Set Auto Keystone in Auto Setup
Set Input search function
Execute Auto Setup
Set screen mode for the case of no signal
Set Display function
Set Logo function
Set Ceiling function
Set Rear function
Set Image mode of HDMI menu.
Set Sound mode of HDMI menu.
Select mode of Terminal menu
Set Pointer mode
Set Standby Mode
Select mode of Picture in Picture menu
Set Subpicture size in Picture in Picture
Set Subpicture position in Picture in Picture
Set Power management function
Set Power management time
Set Power Direct on function
Set channel of Closed caption
Set color of Closed caption
Select Remote Control Reception Code
Disable RC/Projector keys
Input PIN code to release PJ Lock
Select Fan mode
Select Fan control mode
Set time when Filter warning OSD is displayed
Reset Filter used time
Set the value to Factory Default
To Next Page
Loading...
