Sanyo PLC-WU3800 Manual

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
55/74
9.7 Input Status Read Command
9.7.1 CR_INPUT Command
Command “CR_INPUT”[CR]
Details Get selected INPUT No.
Response
Acceptable “000_%1”[CR]
Request data “1”-”6”
Unacceptable “Error code”[CR]
9.7.2 CR_SOURCE Command
Command “CR_SOURCE”[CR]
Details Get selected Source
Response
Acceptable “000_%1”[CR]
Request data
“ANALOG” ---------- Analog (RGB) Input is selected
“SCART” ------------- SCART is selected
“HDMI” ---------------- HDMI is selected
“VIDEO” -------------- Video Input is selected
“S-VIDEO” ----------- S-Video Input is selected
“YPBPR” ------------- Component Input is selected
“NETWORK” -------- Network is selected
Unacceptable “Error code”[CR]
9.7.3 CR_SRCINP1 Command
Command "CR_SRCINP1” [CR]
Details Get selected source of Input 1_CMP1
Response
Acceptable “000_%1”[CR]
Request data
“ANALOG” --------- Analog Input is selected
“YPBPR” ----------- YPBPR Input is selected
“SCART” ----------- Scart Input is selected
Unacceptable “Error code”[CR]
9.7.4 CR_SRCINP2 Command
Command "CR_SRCINP2” [CR]
Details Get selected source of Input 2_CMP2
Response
Acceptable “000_%1”[CR]
Request data
“ANALOG” -------- Analog Input is selected
“OUT” ----------------Monitor out is selected
Unacceptable “Error code”[CR]
9.7.5 CR_SRCINP3 Command
Command "CR_SRCINP3” [CR]
Details Get selected source of Input 3_HDMI
Response
Acceptable “000_%1”[CR]
Request data “HDMI” -------------- HDMI is selected
Unacceptable “Error code”[CR]

Sanyo PLC-WU3800 Specifications

General

Matrix size	0.59 \
Projection distance	0.99 - 12.1 m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	40 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±40 °
Audio input	2
Aspect ratio	16:10
Network ready	Yes
Power supply type	AC
Dimensions (WxDxH)	335.7 x 257.5 x 93.6 mm
Connectivity technology	Wired
Focus	Manual
Digital zoom	16 x
Focal length range	19.2 - 30.2 mm
Noise level	35 dB
Noise level (economic mode)	31 dB
Dot clock scanning frequency	140 MHz
Lamp type	NSHA
Lamp power	275 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3000 h
DVI port	No
Composite video in	-
Serial interface type	RS-232
USB 2.0 ports quantity	0
Supported video modes	1080i, 1080p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	White
AC input voltage	100 - 240 V
Power consumption (standby)	0.7 W
Power consumption (typical)	317 W
Power consumption (PowerSave)	280 W
Cables included	VGA

Weight and Dimensions

Depth	257.5 mm
Width	335.7 mm
Height	93.6 mm
Weight	3500 g