PLC-WU3800 Expand Serial Command Functional Specifications
45/74
8.10.29 CF_FILTIMER Command
Command
“CF_FILTIMER_%1”[CR]
%1
“100” -------------------- Set 100 hours
“200” -------------------- Set 200 hours
“300” -------------------- Set 300 hours
“OFF” ------------------- No warning display
“UP” --------------------- Switch Filter timer forward
(Off →100 → 200 → 300 → Off)
“DN” --------------------- Switch Filter timer backward
(Off → 300 → 200 → 100)
Details Set timer of Filter warning display.
Response
Acceptable “000”[CR]
Unacceptable
“Error Code”[CR]
8.10.30 CF_FILH Command
Command
“CF_FILH_%1”[CR]
%1 “RST” ---------------Reset Filter used time
Details Reset filter used time
Response
Acceptable “000”[CR]
Unacceptable
“Error Code”[CR]
8.10.31 CF_FDEFAULT Command
Command
“CF_FDEFAULT_%1”[CR]
%1 “RST”
Details
Set the value to Factory Default
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable
“Error Code”[CR]