Sanyo PLC-WU3800 Manual

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
26/74
8.6.2 CF_SOURCE Command
Command “CF_SOURCE_%1”[CR]
%1
Input is
Computer 1
“ANALOG” --------- Select Analog Input
“YPBPR” ----------- Select Component Input
“SCART” ----------- Select Scart Input
”UP” ---------------- Switch Input as follows
Analog →YPBPR →Scart →…
”DN” ---------------- Switch Input as follows
Scart →YPBPR →Analog →…
Input is
Computer 2
““ANALOG” --------- Select Analog Input
”UP”
”DN”
Although no operation is made, projector accepts parameter ”UP”
/”DN”
Input is HDMI
“HDMI” ----------- Select HDMI Input
”UP”
”DN”
Although no operation is made, projector accepts parameter ”UP”
/”DN”
Input is Video
“VIDEO” ------------- Select Composite Video Input
”UP”
”DN”
Although no operation is made, projector accepts parameter ”UP”
/”DN”
Input is
S-video
S-VIDEO ------------- Select S-video Input
”UP”
”DN”
Although no operation is made, projector accepts parameter ”UP”
/”DN”
Details
Select Source of currently selected Input
When Input specified by %1 is inappropriate for selected Input, the projector
returns “101” and the command is not executed.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.3 CF_INPUT1 Command
Command “CF_INPUT1_%1_”[CR]
%1
“ANALOG” ---------- Select Analog RGB Input
“YPBPR” ------------- Select Component
“SCART” ------------- Select SCART
Details
Select Input - Computer 1 and source specified in %1 at once.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]

Sanyo PLC-WU3800 Specifications

General

Matrix size	0.59 \
Projection distance	0.99 - 12.1 m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	40 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±40 °
Audio input	2
Aspect ratio	16:10
Network ready	Yes
Power supply type	AC
Dimensions (WxDxH)	335.7 x 257.5 x 93.6 mm
Connectivity technology	Wired
Focus	Manual
Digital zoom	16 x
Focal length range	19.2 - 30.2 mm
Noise level	35 dB
Noise level (economic mode)	31 dB
Dot clock scanning frequency	140 MHz
Lamp type	NSHA
Lamp power	275 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3000 h
DVI port	No
Composite video in	-
Serial interface type	RS-232
USB 2.0 ports quantity	0
Supported video modes	1080i, 1080p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	White
AC input voltage	100 - 240 V
Power consumption (standby)	0.7 W
Power consumption (typical)	317 W
Power consumption (PowerSave)	280 W
Cables included	VGA

Weight and Dimensions

Depth	257.5 mm
Width	335.7 mm
Height	93.6 mm
Weight	3500 g