Sanyo PLC-WU3800 Manual

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
27/74
8.6.4 CF_INPUT2 Command
Command “CF_INPUT2_%1_”[CR]
%1 “ANALOG” ---------- Select Analog RGB Input
Details
Select Input - Computer 2 and source specified in %1 at once.
This command is available in normal Power ON status.
Projector returns “101” by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.5 CF_INPUT3 Command
Command “CF_INPUT3_%1_”[CR]
%1 “HDMI” ------------------ Select HDMI
Details
Select HDMI Input and source specified in %1 at once.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.6 CF_INPUT4 Command
Command “CF_INPUT4 _%1”[CR]
%1 “VIDEO” ----------------- Select Composite video Input
Details
Select Video input and source specified in %1 at once..
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.7 CF_INPUT5 Command
Command “CF_INPUT5 _%1”[CR]
%1 “S-VIDEO” ----------------- Select S-video Input
Details
Select S-video input and source specified in %1 at once..
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.8 CF_INPUT_%1_%2 Command
Command “CF_INPUT_%1_%2”[CR]
%1
“COMPUTER1” ------ Select Computer1 Input
“COMPUTER2” ------ Select Computer2 Input
“HDMI” ------------------ Select HDMI Input
“VIDEO” ---------------- Select Video Input
“S-VIDEO” ------------- Select S-video Input
%2
When %1 is COMPUTER1
ANALOG” ----- Select Analog RGB Input
“YPBPR” -------- Select Component Input
“SCART” -------- Select SCART Input
When %1 is COMPUTER2

Sanyo PLC-WU3800 Specifications

General

Matrix size	0.59 \
Projection distance	0.99 - 12.1 m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	40 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±40 °
Audio input	2
Aspect ratio	16:10
Network ready	Yes
Power supply type	AC
Dimensions (WxDxH)	335.7 x 257.5 x 93.6 mm
Connectivity technology	Wired
Focus	Manual
Digital zoom	16 x
Focal length range	19.2 - 30.2 mm
Noise level	35 dB
Noise level (economic mode)	31 dB
Dot clock scanning frequency	140 MHz
Lamp type	NSHA
Lamp power	275 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3000 h
DVI port	No
Composite video in	-
Serial interface type	RS-232
USB 2.0 ports quantity	0
Supported video modes	1080i, 1080p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	White
AC input voltage	100 - 240 V
Power consumption (standby)	0.7 W
Power consumption (typical)	317 W
Power consumption (PowerSave)	280 W
Cables included	VGA

Weight and Dimensions

Depth	257.5 mm
Width	335.7 mm
Height	93.6 mm
Weight	3500 g