Sanyo PLC-WU3800 - Setting; Capture Projected Image; Logo PIN Code Lock

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
50/74
9.4.6 CR_GAMMA Command
Command "CR_GAMMA”[CR]
Details Get Gamma value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“015”
Unacceptable “Error code”[CR]
9.4.7 CR_WBAL – R Command
Command "CR_WBAL-R”[CR]
Details Get White Balance Red value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“063”
Unacceptable “Error code”[CR]
9.4.8 CR_WBAL – G Command
Command "CR_WBAL-G”[CR]
Details Get White Balance Green value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“063”
Unacceptable “Error code”[CR]
9.4.9 CR_WBAL – B Command
Command "CR_WBAL-B”[CR]
Details Get White Balance Blue value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“063”
Unacceptable “Error code”[CR]
9.4.10 CR_COLTEMP Command
Command "CR_COLTEMP”[CR]
Details Get Color Temp. setting value
Response
Acceptable “000_%a”[CR]
%a
“000” ------------------------------ Xlow
“001” ------------------------------ Low
“002” ------------------------------ Mid
“003” ------------------------------ High
“BLACK” -------------------- Blackboard is selected in Image menu.
“COLOR” -------------------- Colorboard is selected in Image menu
“BLANK” -------------------- Adjusting White Balance
Unacceptable “Error code”[CR]