Sanyo PLC-WU3800 - Setting; Logo Customization Settings; Logo Select Function

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
49/74
9.4 Image Status Read Command
9.4.1 CR_BRIGHT Command
Command “CR_BRIGHT”[CR]
Details Get Brightness value of user control
Response
Acceptable “000_％ａ”[CR]
%a “000”~“063”
Unacceptable “Error code”[CR]
9.4.2 CR_CONT Command
Command “CR_CONT”[CR]
Details Get Contrast value of user control
Response
Acceptable
“000_％ａ”[CR]
%a “000”~“063”
Unacceptable “Error code”[CR]
9.4.3 CR_COLOR Command
Command “CR_COLOR”[CR]
Details Get Color value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“063”
Unacceptable “Error code”[CR]
9.4.4 CR_TINT Command
Command “CR_TINT”[CR]
Details Get Tint value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“063”
Unacceptable
“Error Code”[CR] ----- When the command is invalid due to
condition such as Input source
“?”[CR] --------------------- When unclear command is received
9.4.5 CR_SHARP Command
Command “CR_SHARP”[CR]
Details Get Sharpness value of user control
Response
Acceptable “000_%a”[CR]
%a “000”~“015”
Unacceptable “Error code”[CR]