Sanyo PLC-WU3800 - Maintenance and Cleaning; Lens Cap and Cabinet Cleaning

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
65/74
9.11.5 CR_BACKGND Command
Command “CR_BACKGND” [CR]
Details Get setting status of Screen for no signal
Response
Acceptable “000_%1” [CR]
%1
“BLUE” -------------------------------- Blue Back is selected
“USER” ------------------------------- User is selected
“BLACK” ------------------------------ Black Back is selected
Unacceptable “Error Code” [CR]
9.11.6 CR_DISP Command
Command “CR_DISP”[CR]
Details Get setting status of Display
Response
Acceptable “000_%a”[CR]
%a
“ON” -------------------------- Display is ON
“OFF” ------------------------ Display is OFF
“CNTDWNOFF” ---------- Countdown OFF
Unacceptable “Error code”[CR]
9.11.7 CR_LOGO Command
Command “CR_LOGO”[CR]
Details Get setting status of Logo
Response
Acceptable “000_%1”[CR]
%1
“OFF” ------------------------------ Logo function is OFF
“DFLT” ----------------------------- Default Logo is selected
“USER” ---------------------------- User Logo is selected
Unacceptable “Error code”[CR]
9.11.8 CR_CEIL Command
Command “CR_CEIL” [CR]
Details Get setting status of Ceiling
Response
Acceptable “000_%1”[CR]
%1
“ON” ------------------------------ Ceiling is ON
“OFF” ----------------------------- Ceiling is OFF
Unacceptable “Error Code” [CR]
9.11.9 CR_REAR Command
Command “CR_REAR” [CR]
Details Get setting status of Rear
Response
Acceptable “000_%1”[CR]
%1
“ON” ------------------------------ Rear is ON
“OFF” ----------------------------- Rear is OFF
Unacceptable “Error Code” [CR]