Sanyo PLC-WU3800 Manual

PLC-WU3800 Expand Serial Command Functional Specifications
                                       
7/74
9.11.20 CR_ON-STA Command ............................................................................. 67
9.11.21 CR_CCAPTIONDISP Command ............................................................... 67
9.11.22 CR_CCAPTIONCOLOR Command .......................................................... 68
9.11.23 CR_RCODE Command ............................................................................. 68
9.11.24 CR_SECURITY Command ........................................................................ 68
9.11.25 CR_KEYDIS Command ............................................................................. 68
9.11.26 CR_PJLOCKNOW Command ................................................................... 68
9.11.27 CR_PJLOCKMENU Command ................................................................. 69
9.11.28 CR_FANMODE Command ........................................................................ 69
9.11.29 CR_FANCONTROL Command ................................................................. 69
9.11.30 CR_FILH Command .................................................................................. 69
9.11.31 CR_FILREPL Command ........................................................................... 69
9.11.32 CR_FILTIMER Command .......................................................................... 70
9.12 Other Status Read Command ............................................................................. 71
9.12.1 CR_STATUS Command ................................................................................ 71
9.12.2 CR_SIGNAL Command ................................................................................ 71
9.12.3 CR_VMUTE Command ................................................................................. 71
9.12.4 CR_FREEZE Command ................................................................................ 71
9.12.5 CR_PTIMER Command ................................................................................ 72
9.12.6 CR_TEMPWARN Command ......................................................................... 72
9.12.7 CR_TEMP Command .................................................................................... 73
9.12.8 CR_TEMPFAIL Command ............................................................................ 74

Sanyo PLC-WU3800 Specifications

General

Matrix size	0.59 \
Projection distance	0.99 - 12.1 m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Screen size compatibility	40 - 300 \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	±40 °
Audio input	2
Aspect ratio	16:10
Network ready	Yes
Power supply type	AC
Dimensions (WxDxH)	335.7 x 257.5 x 93.6 mm
Connectivity technology	Wired
Focus	Manual
Digital zoom	16 x
Focal length range	19.2 - 30.2 mm
Noise level	35 dB
Noise level (economic mode)	31 dB
Dot clock scanning frequency	140 MHz
Lamp type	NSHA
Lamp power	275 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3000 h
DVI port	No
Composite video in	-
Serial interface type	RS-232
USB 2.0 ports quantity	0
Supported video modes	1080i, 1080p, 720p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Product color	White
AC input voltage	100 - 240 V
Power consumption (standby)	0.7 W
Power consumption (typical)	317 W
Power consumption (PowerSave)	280 W
Cables included	VGA

Weight and Dimensions

Depth	257.5 mm
Width	335.7 mm
Height	93.6 mm
Weight	3500 g