BioPAT
®
Trace | Multi Trace Operating Instructions 31
Design and Function
The upper part of the flow system represents the donor stream, which is
responsible for the infeed of the calibration solution into the diffusion
module. Depending on the task at hand, the carrier stream accumulates the
analyte in the diffusion module or in the dialysis probe.
Check Valve
Flow direction
Vessel
Membrane
Pump 2
Pump 1
Dialysis Probe
Liquid Waste
Measurement
Cell
Diffusion
Module
Calibration Standard 1
Calibration Standard 2
Transport buffer
Valve 2
Valve 1
Valve 3
BioPAT
®
Trace
Check Valve
Selecting Valve
Flow direction
Vessel
Membrane
Pump 2
Pump 1
Dialysis Probe 1
Liquid Waste
Measurement
Cell
Diffusion
Module
Dialysis Probe 2
Dialysis Probe 3
Dialysis Probe 4
Calibration Standard 1
Calibration Standard 2
Transport buffer
Valve 2
Valve 1
Valve 3
BioPAT
®
Multi Trace
Fig. 10: Flow system
To Next Page
Loading...
