64 BioPAT
®
Trace | Multi Trace Operating Instructions
Initial Installation
t First download the other important files for
the rest of the installation onto your computer
by clicking the right mouse button. They can
be found in the “Download” menu item. The
following files can be found here:
— setup_tracemon_x_x_x as setup file of the
operating software
(_x_x_x = version number)
— ip_set as the backup file of the boot file
— Operating instructions for the BioPAT
®
Trace | Multi Trace as PDF file
t Then change the device’s network address.
Itcan be found in the “Network settings”
menu item.
t In order to do this, you will need to log in with
the password TuSh1Vf5Ja.
NOTICE
In most cases, the factory-set IP address will not
be compatible with company networks. Have a
suitable IP address assigned by your network
administrator; otherwise the device may not be
able to connect with the operating software.
To Next Page
Loading...
