BioPAT
®
Trace | Multi Trace Operating Instructions 65
Initial Installation
If you would like to work via a LAN or intranet, the
factory-set network address or the network name
may not be compatible with your network.
t If this is the case, please contact your network
administrator and change the BioPAT
®
Trace|
Multi Trace’s IP address in the form field.
y After the network address has been changed,
the BioPAT
®
Trace | Multi Trace can only be
accessed via this new IP address. The last
3characters of the IP address (here 231)
represent the number of the device that is
displayed in the user interface.
To Next Page
Loading...
