BioPAT
®
Trace | Multi Trace Operating Instructions 71
Initial Installation
Work step Function Chapter Page Status
4 Connect inlet and outlet lines 6.1.2 41
Connect tubing to transport
buffer
41
Connect tubing to calibration
solutions
41
Connect waste line to waste
container
41
5 Switch on device 7 73
Switch on On/off switch on rear
of the device
4.1 26
Wait for internal computer to
boot (white LED turns red)
6.4 63
6 Start PC software 8.1 78
Double-click “Start” icon on
desktop (trace_mon)
8 75
Wait for automatic connection
setup or connect device
75
Start with selecting “new tubing
set”
6.1.5 54
7 Set operating parameters
(“Settings” menu)
8.3.7 89
Basic Settings 89
Set measurement period 8.3.7 89
Enter calibration standard values 8.5.1 110
8 Connect sampling probe 4.3 33
Connect dialysis probe to tubing 6.2.5 61
To Next Page
Loading...
