72 BioPAT
®
Trace | Multi Trace Operating Instructions
Initial Installation
Work step Function Chapter Page Status
9 Starting the measurements 8.1.1 78
Confirm “Fill” button and wait for
calibration
8 75ff
Alternatively: Activate the “Start
autom.” option – device starts
measurement automatically after
filling and calibration
75ff
10 For methanol | ethanol only:
Connect enzyme reactor
6.1.5 54
Einbau des Enzymreaktor in das
Schlauchset
54ff
11 Check measuring chamber 4.3 and
6.1.2
33 | 41
Check measuring chamber for
absence of air bubbles | rinse if
necessary
33 | 41
12 For dialysis only: Perform
reference measurement
8.2.1 82ff
Perform reference measurement
with external sample or known
measurement value
82ff
13
Optional: Connect analog output
to process control system
8.3.7 89
Connect analog output (0–10 V,
4–20 mA or 0–20 mA)
89
To Next Page
Loading...
