Operating
the Moisture Analyzer
The Moisture Analyzer is designed to test moisture
content in a large variety of materials including pow-
ders, pastes, liquids and solids� The performance of the
analyzer is dependent upon selecting optimum dry-
ing analysis conditions for your specific sample type�
Sartorius will support you in finding the set of testing
parameters (referred to as a program) you need for your
specific tests� On request, Sartorius will provide a chart
of the parameters and test results we have compiled by
testing samples in our laboratory and comparing the
results to those obtained by reference methods�
Standby Screen
During warm-up, your analyzer will enter the Standby
mode and the Standby screen will be displayed�
It is from the Standby (or Test Done) screen that all
functions of operating the analyzer, including testing
samples and setting parameters, take place�
The standby screen shows the following
information:
§ Program name
§ Time and date
§ Standby temperature and actual temperature
§ Various soft keys for options that are available depend-
ing on the security setup options engaged
§ Warnings that will need to be addressed before
testing
DRY MILK POWDER
09/07/2012 02:14 PM
Standby
Ver. 4.01.AG
LMA100P Moisture Analyzer
Recall Setup
Weigh Users
Press START ke y to be gin test
Standby
Current
60
59
22
To Next Page
Loading...
Need help?
General
