Getting Started
Thank you for choosing the Sartorius
moisture analyzer� The modular analyti-
cal instrument is designed to be confi-
gured to meet various performance
requirements� Each analyzer consists
of two parts, a control module and
a heater module� The control module
contains the keypad and display with
the appropriate electronics� The heater
module consists of an electronic balance
and heating cavity� Heater modules may
be interfaced with a single control
module�
On initial power-up, the control module
will automatically detect how many
heater modules have been connected
and are powered on� If more than one
heater module is detected, the analyzer
will run in the multi-module mode�
Storage and Shipping Conditions
Allowable storage temperature:
–10 to +50°C
–14°F to +122°F
Allowable shipping temperature:
–40 to +70°C
–40°F���+158°F
Unpacking the Moisture Analyzer
The moisture analyzer is delivered in
a set of two custom-made boxes specif-
ically designed for this precision instru-
ment to provide optimum protection
during transportation�
Note
Retain the original packaging in order
to ship the analyzer if it needs to be
transported or stored at some future
time�
8