Results Printout Format
The printout format may be customized by choosing
the specific content regarding the analyzer or your test-
ing conditions that may be important to your testing
program� The default printout format is shown below:
To change the printout format:
§ From the Setup Menu screen press the 4 key or high-
light Results Printout format using the navigation keys
and press Enter to display the Results Printout menu�
49
1. He ader On
2. Analyz er info On
3. Operator Off
ffO rebmun elpmaS.4
5. Calibration info Off
6. Program name On
7. Program info On
8. Interval print Off
9. Weight info On
0. Signature line Off
Results Printout Menu
On/Off
LMP100P Moisture Analyzer
Module 1: M30604026
Program 1: Default
UNITS: Moisture
MODE: Standard START DELAY: 0 sec M2
TEMP1: 105C, Std TIME1: Off
TEMP2: Off TIME2: Off
SLOPE: Window: 1.0 %IW: 0.050 Actual
STANDBY: 60C EQILIBRATE: Off*
IDEAL WT: 5.0 grams LOCK: Off
RESULT on 06/15/2003 at 10:24 AM
Elapsed time: 07:13
52.466 %M
Initial Weight = 5.1671 grams
Final Weight = 2.4561 grams
Weight Loss = 2.7110 grams
* = only for model LMA100P
To Next Page
Loading...
Need help?
General
