Sartorius Mark 3 - Setup Menu; Setting the Device Parameters in the Program Manage Menu

Setup Menu
All settings including changing of instrument options
and program parameters, are selected in the Setup
menu� Each subject is listed on the Setup menu screen�
To enter the Setup menu:
§ From the Standby screen, press the Setup soft key to
display the Setup Menu screen�
Note
Pressing the arrow soft key from the Setup menu or any
submenu will always take you back one level�
Setting the Device Parameters
in the Program Manage Menu
The Program Manage Menu provides access to all setup
functions associated with creating, editing, or manag-
ing sample drying programs�
To enter the Program Manage Menu:
§ From the Setup menu screen, press the 1 key
or highlight “Program manage”, using the navigation
keys and press Enter�
29
1) Program manage
2) Data log
3) Modify operators
4) Results printout format
5) Time and date
6) Communication ports
7) Conserve mode
8) Security
9) Audio & video
0) Module port scan
.
) Service
Set up Menu
09/07/2012 02:14 PM