62
Security
The security mode allows the analyzer to be pass code
protected from making unauthorized changes or to
access selectable features including the setup configu-
ration, programs, the data log and other areas� The
security mode is also where important actions can be
taken, including clearing the data log or operators, as
well as managing program storage or restoring the ana-
lyzer to original or factory default settings�
To edit or change any parameter under Security menu:
§ From the Setup menu screen, press the 8 key or
highlight, Security mode using the navigation keys and
press Enter to display the Security menu�
Activate and Deactivate Security
To activate security:
§ From the Security menu screen the press 1 for Set
Security On� The display will change to the Pass Code
screen�
§ Type a pass code up to 6 digits using the numeric
keys and press the Enter key� The analyzer will now be
secured as set in the “Set up security access” menu� The
display will return to the Setup menu�
1. Set security On
2. Set up security access
3. Clear data log
4. Clear operators
5. Restore factory defaults
6. Manage program storage
Security menu
On/Off
To Next Page
Loading...
Need help?
General
