87
C Marking
The moisture analyzer complies
with the following EC Directives
and European Standards:
Council Directive 2004/108/EEC:
“Electromagnetic compatibility
(EMC)”
Applicable European Standards:
Limitation of emissions:
In accordance with product stand-
ard EN 61326-1 Class B (residential
area)
Defined immunity to interference:
in accordance with product stand-
ard EN 61326-1
(minimum test requirements,
un-monitored operation)
!
Class A Warning
Warning: This is a class A product�
In a domestic environment this
product may cause radio interfer-
ence in wich case the user may
be required to take adequate
measures�
Note:
The operator shall be responsible for
any modifications to Sartorius equip-
ment and for connections of cables not
supplied by Sartorius and must check
and, if necessary, correct these modifi-
cations� On request, Sartorius will
provide information on the minimum
operating specifications in accordance
with the standards listed above for
defined immunity to interference�
Council Directive 2006/95/EC:
“Electrical equipment designed for use
within certain voltage limits”
Applicable European Standards:
EN61010-1: 2001
Safety requirements for electrical
equipment for measurement, control
and laboratory use
Part 1: General requirements
If you use electrical equipment in
installations and under ambient condi-
tions subject to stricter safety standards
than those described in the manual,
you must comply with the provisions as
specified in the applicable regulations
for installation in your country�
To Next Page
Loading...
