Sartorius Mark 3 User Manual

70
Service
For best performance and reliable usage, the analyzer
requires periodic cleaning (see the chapter on “Clean-
ing”)�
The analyzer contains a wide variety of features related
to calibrating and troubleshooting�
The Service menu is where you have access to:
§ Calibrating the balance
§ Adjusting the temperature
§ Establishing a calibration schedule
§ Troubleshooting and diagnostics
(Factory secured area, under the guidance of
Sartorius Service personnel only)
System
This screen will display important information about
your analyzer including model, serial number, software
version, dates of last calibration and adjustment, instal-
lation date and MAC address�
To view the system screen:
§ From the Setup menu screen, press the “.” key or high-
light Service using the navigation keys and press Enter
to display the Service menu screen�
To view and print system information:
§ From the System menu press the 1 key to display Sys-
tem screen�
§ Press the Print soft key to print this screen�
LMA100P Moisture Analyzer
SN: M3114045B
Control sw: 2.00.00
Module sw: 2.00.00
Last bal cal: 06/ 13/2 012 01:37 PM
Last temp cal: 06/13/2012 10:42 AM
Installation Control sn: 06/10/2012
M AC address: 0040d53114 045
System
09/07/2012 02:14 PM
Print
1. System
2. Calibrate balance
3. Adjust temperature
4. Advanced
Servic e menu
09/07/2012 02:14 PM

Sartorius Mark 3 Specifications

General

Brand	Sartorius
Model	Mark 3
Category	Measuring Instruments
Language	English