Modify Operators
The analyzer may be programmed with a custom list of
operators specific for your company�
Operators can be alphanumeric and contain various
characters�
To change or set operator names:
§ Press the 3 key from the Setup menu to display the
current list of operators�
§ Use the arrow soft keys, then press Enter for any
operator slot to display the alphanumeric entry screen�
You may also press the Edit soft key for the highlighted
name�
§ Enter the desired name, then press the Enter key to
return to the Set Users/Operators Menu�
§ Line 20 is a blank line that cannot be edited�
§ When finished, press the Arrow soft key to return to
the Setup menu�
Note
To enable the use of Operators and to have the opera-
tor name on the result printout, Operator must first be
activated in the Results Printout Format menu� When
Operator is activated, then the User soft key will be
available from the Standby menu to select an operator
from the list of operators�
Note
Operator names will be deleted when downloading
a new version of software�
47
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Operator setup
Edit
Clear
•
To Next Page
Loading...
