§ Toggle the Select All or Clear All soft
key to select or deselect all data in order
to define a known starting point�
§ Use the navigation keys to scroll
through the data: right arrow to page
down, left arrow to page up�
§ Highlight a test result and press the
Enter key to show STAT� Continue for
all desired results to form the group�
To print the data group:
§ From the data log selection screen,
press the Print Stat soft key to print the
selected group results�
To print the entire data log:
§ From the data log selection screen,
press the Print All soft key to print all
the data log results�
To print statistics for a group:
§ After selecting a group from the data
log selection screen, press the Arrow
soft key to return to the Data Log menu
while retaining the group�
§ From the Data Log menu, press the 2
key to view statistics of the selected
results� The display will show statistics
including the average, standard devia-
tion, relative standard deviation, the
highest value and the lowest value�
§ To print the statistics, press the Print
soft key� Use the Arrow soft key to
return to the Data Log menu�
To select by date range:
§ From the Data Log menu screen, press
the 3 key for Select by date range to go
to the Select data range screen�
§ Press the 1 key and set a start date
§ Press the 2 key and set an end date
§ Press the Arrow soft key to sort the
data log for this date range�
All data in the data log tested on and
between these dates will be retained as
a group� The display will return to the
Data Log menu screen� From here you
can perform statistics on the group by
pressing the 2 key for Statistics, or view
selected data by pressing the 5 key for
Select data points� All data in this group
will be displayed when you press STAT�
From here you may print this group by
pressing the Print soft key�
46
To Next Page
Loading...
Need help?
General
