65
Restore Factory Defaults
At some time it may be necessary to return the
analyzer to factory default settings� Security must
be deactivated to perform this function�
To restore factory defaults:
§ From the Security Menu screen, press the 5 key
or highlight Restore factory defaults and press the
Enter key to display a confirmation screen�
§ Press the 1 key for yes to restore all factory settings
Note
Restoring factory default settings will cause
a permanent loss of results in the data log as well as
clear all programs and any user setup parameters�
Manage Program Storage
The analyzer has the capacity to store a custom set
of programs in memory� In the event that the user
selectable programs become altered, the stored custom
set of programs may be re-loaded� This section also all
programs to be cleared or reload saved programs to be
reloaded from an archive or another analyzer� Security
must be deactivated to perform this function�
1) Clear all programs
2) Save user programs to archive
3) Load user programs from archiv
4) Transfer programs
Manage program storage
To Next Page
Loading...
Need help?
General
