8 VERSA SATEL
Characters available after next keystroke
key mode [ABC] key mode [abc]
1 # 1 #
2 B C 2 a b c
3 D E F 3 d
4 4
5 5
6 6
7 7
8 8
9 9
0
0
Table 1. Characters available in the keypad when entering telephone numbers (to change the
letter case, press ).
Special character Function description
B switch-over to pulse dialing
C switch-over to tone dialing (DTMF)
D waiting for additional signal
E 3 second pause
F 10 second pause
signal in DTMF mode
# signal # in DTMF mode
a
b
other signals generated in DTMF mode
c
d
Table 2. Special character functions.
Entering names
The characters that can be entered by using the keys are presented in Table 3. Keep
pressing the key until the required character appears. Long press the key to display the digit
assigned to it.
Shown on the right side in the upper line of the display is information about the letter case:
[ABC] or [abc] (it will be displayed after pressing any key and will be visible for a few seconds
after the last keystroke).
The key moves the cursor to the right, and the key – to the left. The key
deletes the character on the left side of the cursor.
To Next Page