SATEL VERSA 53
QR-code – pressing the button will display the “QR-code” window. The window shows the
QR code containing information required when configuring settings of the VERSA
CONTROL application. You can read the QR code by using a mobile device or export to
file and transmit to the users. The QR code facilitates configuring the VERSA CONTROL
application settings.
Refresh – pressing the button will update information presented in the MAC, ID and IP fields.
Time from a time server
LAN [Time from srvLAN] – if the option is enabled, the control panel clock will be
synchronized with the time server once a day.
For communication with the time server, the DNS server must be used.
Time zone – difference between the universal time (GMT) and the zone time. The parameter
is required, if the control panel clock is to be synchronized with the time server.
8.3.1 LAN
Obtain IP address automatically (DHCP) [DHCP] – if this option is enabled, the module will
automatically download data on IP address, subnet mask and gateway from the DHCP
server (in such a case, you do not have to program these parameters).
The IP address assigned to the module can be read in the LCD keypad using the
MODULE VER. user function available in the TESTS submenu. For a detailed description
of the function please refer to the user manual for the control panel.
IP address – module IP address.
Subnet mask – the mask of the subnet in which the module is working.
Gateway – IP address of the network device through which the other devices in the local
network can communicate with devices in other networks.
Obtain DNS server address automatically [DHCP-DNS] – if this option is enabled, the
DNS server IP address is downloaded automatically from the DHCP server. The option is
available, when the OBTAIN IP ADDRESS AUTOMATICALLY (DHCP) option is enabled.
DNS server – IP address of the DNS server which is to be used by the module. It can be
programmed, if the O
BTAIN DNS SERVER ADDRESS AUTOMATICALLY option is disabled.
PING test
Address to test [PING] – address of the device to which a ping command to test
communication is to be sent by the module. You can enter IP address or domain name.
Period [PING period] – the time interval between successive communication tests using the
ping command. If value 0 is programmed, the communication test is disabled.
Tries no. before trouble [PING tries] – the number of failed communication tests (the
module received no answer to the ping command sent), after which the trouble will be
reported. If value 0 is programmed, the communication test is disabled.
8.4 ABAX wireless system controller
8.4.1 Parameters and options of the controller
Response period – communication with wireless devices takes place in specified intervals.
The controller is then gathering information on the status of wireless devices and, if
necessary, sending commands to the devices, e.g. switching the detectors to their
active/passive state, switching on/off the test mode and/or changing configuration of the
devices. The response period can be 12, 24 or 36 seconds. The less often communication
To Next Page
Loading...
