76 VERSA SATEL
– enter the code, if the telephone user can confirm having listened to the voice message
and clear the messaging,
– indicate the alarm system user, if the telephone user is to automatically get access to
the voice menu after entering the code (the user must have the INT-VG ACCESS right).
2. Assign voice messages to text messages.
3. Record or synthesize the voice messages that are to be used for notification.
4. Determine whether the control panel is to play back the voice message after going off-
hook, or 8/16 seconds after the dialing is completed (NO ANSWER TONE TEST).
11.2 E-mail messaging
E-mail messages are sent by means of the ETHM-1 Plus Ethernet module. The content of e-
mail messages is automatically generated by the control panel.
11.2.1 Configuring the e-mail messaging
You can configure the parameters and options of e-mail messaging by means of the
DLOADX program: “VERSA – Structure” window “Hardware” tab [Ethernet module
name] “Messaging” tab “E-MAIL” tab. Before making any changes, click on the “Read”
button, and after making the changes – on the “Write” button (the data relating to the e-mail
messaging are not read after clicking on the button or saved after clicking on the
button in the DLOADX program main menu).
11.2.2 Parameters and options of the e-mail messaging
Fig. 24. DLOADX program: configuring the e-mail messaging.
LAN – if the option is enabled, the control panel can notify of occurrence of specified events
by means of e-mail messages.
Email address – e-mail address to which messages are to be sent for notification of events.
ON – with this option enabled, it will be possible to send messages to the given e-mail
address for notification of events.
Events type – define of which events the given e-mail address is to be notified.
To Next Page
Loading...
