48 VERSA SATEL
Fig. 13. DLOADX program: configuring the keypad.
Options
Sign. entry delay [Entry time sign.] – if this option is enabled, the keypad will audibly signal
the entry delay countdown.
Sign. exit delay [Exit time sign.] – if this option is enabled, the keypad will audibly signal the
exit delay countdown.
Sign. alarms [Alarm signalling] – if this option is enabled, the keypad will signal the alarms
audibly. The alarm is signaled during the KEYPAD’S ALARM TIME (see: “Global times” p. 29).
Quick arming – Partition 1 [Part.1 QuickArm] – if this option is enabled, partition 1 can be
armed without entering the code. The quick arming is not possible, if the GRADE 2 option is
enabled in the control panel.
Quick arming – Partition 2 [Part.2 QuickArm] – if this option is enabled, partition 2 can be
armed without entering the code. The quick arming is not possible, if the GRADE 2 option is
enabled in the control panel.
Keys sound – with this option enabled, pressing the keypad keys is confirmed by beeps.
Sign. trbl in part. arm [Trbl.in part.arm] – if this option is enabled, the LED goes off after
both partitions are fully armed (if the option is disabled, the LED goes off after just one of
the partitions is armed in any mode).
Show code entering [Code entry ind.] – if this option is enabled, entering the code is
presented:
LCD keypad – on the keypad display by asterisks,
To Next Page
Loading...
