Section 2: Installation
Page 2-6 CG2 Series Operator Manual
2.3 LOADING LABELS OR TAGS (cont’d)
5.
After loading the media, turn on the power.
The printer is online and the ON LINE (POWER) LED
lights green.
When the printer is ready, press the FEED/LINE button
to output the leading part of the media.
2.3.3 Overview of the Roll media and Fan-folded media loading path
Caution
• When replacing media, bear in mind that the print head and its surrounding area remain hot.
Keep your fingers away from these areas to prevent injury.
• Avoid touching even the edge of the print head with your bare hands.
Roll media (Face-in)
Roll media (Face-out)
Fan-fold media
(Printed side face up)
To Next Page
Loading...
