SATO CG2 Series User Manual

Section 7: Interface Specifications
Page 7-12 CG2 Series Operator Manual
7.4 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN (cont’d)
7.4.3 Software Specifications
Protocol TCP/IP
Network layer ARP, RARP, IP, ICMP
Session layer TCP, UDP
Application layer LPR, FTP, TELNET, BOOTP, DHCP, HTTP
Notes
• Send the print data by LPR and FTP of TCP/IP and dedicated socket protocol.
• Use socket connection to get the printer status.
9) Security (Combination of authentication and encryption)
Ad hoc mode
Security IEEE 802.11 IEEE 802.11i Encryption
None None None None
WEP Open System None WEP key
Shared Key
Infrastructure mode
Security IEEE 802.11 IEEE 802.11i Encryption
None None None None
WEP Open System None WEP key
Shared Key None
WPA None PSK TKIP
EAP
WPA2 None PSK AES
EAP
Dynamic WEP None EAP WEP key
[Notes]
Consult your system administrator about the interference from radio waves when
using the printer near medical equipment and facilities.
Maximum receive
buffer capacity
1MB
Near full occurred
Near full released
0MB
1MB
Remaining 0.25MB
Remaining 0.5MB

SATO CG2 Series Specifications

General

Brand	SATO
Model	CG2 Series
Category	Printer
Language	English