SBC PCD2.M5 Series - Page 137

Hardware Manual for the PCD2.M5 Series│Document 26/856; Version EN 12│2014-07-24
Saia-Burgess Controls AG
Digital output modules
Input/output (I/O) modules
6-26
6
Output circuits and terminal designation
1, 3, 5, 7
17, 19, 21, 23
9, 11, 13, 15
25, 27, 29, 31
A15 A14
2 4
10 .. 32 VDC
Ribbon cable
connector
6 8
A13 A12
10
A11
8 bit latch
LEDs
Loads
Watchdog: This module can interact with the watchdog, if it is used on base address 240. In
this case, the last input with address 255 cannot be used.
Fordetails,pleaserefertothe"Watchdog" section, which describes the correct use of the
watchdog in conjunction with PCD2 components.