Schenck process Intecont Tersus Beltweigher User Manual

Parameters
BV-H2464GB, 1234
- 102 -
INTECONT® Tersus Belt weigher, Instruction Manual
Schenck Process Group
P20.04 ID Preset Value 4
Default: 594
Corresponds to P20.01 ID Preset Value 1
P20.05 ID Preset Value 5
Default: 0
Corresponds to P20.01 ID Preset Value 1
P20.06 ID Preset Value 6
Default: 0
Corresponds to P20.01 ID Preset Value 1
P20.07 ID Preset Value 7
Default: 0
Corresponds to P20.01 ID Preset Value 1
P20.08 ID Preset Value 8
Default: 0
Corresponds to P20.01 ID Preset Value 1
P20.09 ID Read Value 1
Default: 752
Selecting the first value to be read from weighing electronics in the fieldbus telegram. The
number of the value (ID) can be found in the Data Communication manual (BV-H2448).
P20.10 ID Read Value 2
Default: 784
As P20.09 ID Read Value 1
P20.11 ID Read Value 3
Default: 1552
As P20.09 ID Read Value 1

Schenck process Intecont Tersus Beltweigher Specifications

General

Brand	Schenck process
Model	Intecont Tersus Beltweigher
Category	Control Panel
Language	English