Schenck process Intecont Tersus Beltweigher User Manual

Parameter functions
INTECONT® Tersus Belt weigher, Instruction Manual
Schenck Process Group
BV-H2464GB, 1234
- 33 -
9
99
9 Parameter functions
Parameter functionsParameter functions
Parameter functions
Functions: Parameter
Read Parameters
Enter Parameters
Print Parameters
Load Factory Defaults
Load Custom Defaults Parameter
Option activate
Display, alter and print the parameter on the device.
Load Custom Defaults will set the device to a defined state that was saved at, for example, setup. The Load
Factory Defaults function will reset completely the parameterization. (Parameters [➙ 49])
Additional functions can be activated by the Option activate function (Set option [➙ 138]).
9.1
9.19.1
9.1 Read Parameters
Read Parameters Read Parameters
Read Parameters
Parameter are changeable characteristics or data with which the device can be adapted to its special weigh-
ing task.
You can find the meaning of the parameters in the detailed parameter description.
The input of parameters is protected by a password. They can inspected without any hazard with the Read
Parameters function. The parameters are broken down into functional blocks and numbered within a block.
Parameters are composed as follows:
Pxx.yy <Text>, where: xx: block number
yy: Number of the parameters in the block
<Text> Explanatory name of the parameters (language-dependent)
Depending on the situation, individual parameters or groups of parameters may be faded
out to highlight the parameters important to an application. Hidden parameters can only be
shown with the EasyServe service software and they can also be cleared there for the dis-
play on the unit wherever necessary. Fading out may result in breaks in the numbering.
Some parameters can be write protected. The write protection can also be configured using
EasyServe.
Reading parameters:

Schenck process Intecont Tersus Beltweigher Specifications

General

Brand	Schenck process
Model	Intecont Tersus Beltweigher
Category	Control Panel
Language	English