Schenck process Intecont Tersus Beltweigher User Manual

Parameters
BV-H2464GB, 1234
- 108 -
INTECONT® Tersus Belt weigher, Instruction Manual
Schenck Process Group
13.3.2.24
13.3.2.2413.3.2.24
13.3.2.24 Parameter Block
Parameter BlockParameter Block
Parameter Block 24
2424
24 -
--
- Second Display
Second DisplaySecond Display
Second Display
P24.01 Second Display active
Default: NO
Alternative: NO
YES
A DLZ055 or DLZ110 model large-scale display can be connected at interface X11.
The display shows the value selected in the upper line of INTECONT Tersus.
The symbols in the display and what they mean:
I : Feedrate
i : Relative Feedrate
Q : Belt Load
q : Relative Belt Load
v : Belt Speed
1 : Totalizer 1
p : Perc. setpoint
x : Deviation
2 : Totalizer 2
3 : Totalizer 3
b : Batch Setpoint
d : Batch Residual Amount
N : Batch No.
C : Batch Actual Value
B : Reload Setpoint
D : Reload Amount
P : Setpoint
E : External Setpoint
The large-scale display can only show the dimensions kg or t.
If the letter space is illuminated as a full-surface block, this is an indication that the value
shown is invalid.
Either it is not possible to show the desired format or the unit is in the operator dialog.
Beyond this, the block is also shown to indicate that printing is active.
In legal-for-trade beltweigher application following symbols are used:
Q : Feedrate
q : Relative Feedrate
F : Belt Load
f : Relative Belt Load
P24.02 Baud rate
Default: 9600
Alternative: 1200
2400
4800
9600
19200
38400

Schenck process Intecont Tersus Beltweigher Specifications

General

Brand	Schenck process
Model	Intecont Tersus Beltweigher
Category	Control Panel
Language	English