Schenck process Intecont Tersus Beltweigher User Manual

Hardware and technical data
BV-H2464GB, 1234
- 122 -
INTECONT® Tersus Belt weigher, Instruction Manual
Schenck Process Group
Wall-Mounted Housing
IP65 wall-mounted housing, 380 mm x 300 mm x 236 mm
Power supply 85 - 264 VAC / 24 VDC, 2 A
Power supply, external, desk-top
model
85 – 264 VAC / 24 VDC, 1.25 A
Event printer
Printer with RS232 serial interface and system cable
Large-scale displays
Can be selected from: VLD 20100 (LED, 100 mm);
VLZ 20045 (LCD, 45 mm); VLZ 20100 (LCD, 100 mm)
Control cubicles and
equipment frames
Control cubicles and equipment frames for several
INTECONT Tersus units with or without feed
Description Type Material Nummer
Front-of-panel unit with VWF 20650 software for the weighfeeder
VEG 20650
Basic equipment V082001.B01
with Modbus option V082001.B02
with PROFIBUS option V082001.B03
with DeviceNet option V082001.B04
with Ethernet/IP option V082001.B05
Front-of-panel unit with VBW 20650 software for the weighfeeder
VEG 20650
Basic equipment V082002.B01
with Modbus option V082002.B02
with PROFIBUS option V082002.B03
with DeviceNet option V082002.B04
with Ethernet/IP option V082002.B05
Front-of-panel unit with VLW 20650 software for the loss-in-weight feeder
VEG 20650
Basic equipment V082003.B01
with Modbus option V082003.B02
with PROFIBUS option V082003.B03
with DeviceNet option V082003.B04
with Ethernet/IP option V082003.B05
Front-of-panel unit with VMC 20650 software for MULTICOR
VEG 20650
Basic equipment V082004.B01
with Modbus option V082004.B02
with PROFIBUS option V082004.B03
with DeviceNet option V082004.B04
with Ethernet/IP option V082004.B05
Front-of-panel unit with VIF 20650 software for MULTISTREAM
VEG 20650
Basic equipment V082005.B01

Schenck process Intecont Tersus Beltweigher Specifications

General

Brand	Schenck process
Model	Intecont Tersus Beltweigher
Category	Control Panel
Language	English